A restored cabinet lives or dies on the marquee, and an acrylic arcade cabinet panel has to carry print, hide a light source and stay flat above a screen that runs for hours.
A collector in Osaka rebuilt six cabinets from the early 1980s. The first marquee used clear 3 mm sheet over a warm white strip, and the strip read as a row of dots through the artwork at every angle.
Diffusion behind an acrylic arcade cabinet marquee
Opal against clear
- 3 mm opal: LED strip, even glow
- 5 mm opal: incandescent lamp, heat tolerant
- Clear: only with a diffuser sheet behind
- Print: reverse printed on the inner face
Reverse printing on the inner face puts the ink where the light is, so the artwork glows and the outside stays smooth for cleaning. Printing on the outer face gives a sharper image and collects dust in the ink.
Bezel masking around the screen
A bezel is a printed mask on a clear panel, not a painted one. Screen print holds a hard edge at the window, and a scan of the original bezel recovers the border shapes that a new cabinet needs to look correct.
Heat, flatness and service access
A lamp behind a marquee warms the panel from the inside, and a thin sheet softens and sags toward the light over a long session. Venting the space behind the marquee and fitting a 5 mm panel keeps the face flat, and an LED conversion removes the heat altogether.
Lit panel design for signage follows the same rules as acrylic lightbox construction.
Send your cabinet dimensions, lamp type and artwork files to oversales@rpplexiglass.com for a quotation.
Frequently Asked Questions
Which acrylic for a lit marquee?
Opal diffuser in 3 mm for an LED strip, 5 mm for an incandescent lamp. Clear sheet behind a lamp shows the strip as dots, which is the most common complaint after a build.
Can an old bezel be reproduced?
Yes, from the original panel or a traced outline. The masking band is printed rather than painted, so a scan of the old bezel recovers the exact window and border shapes.
Does heat behind a marquee distort the panel?
An incandescent lamp will soften a thin panel over hours of play. Ventilation behind the marquee and a 5 mm panel keep the shape, and an LED conversion removes the problem entirely.
