Acrylic Piano Key Guard: Studio Fit

A shared instrument takes more wear from hands, rings and cleaning cloths than from playing, and an acrylic piano key guard separates the keys from that traffic while leaving the keyboard readable.

A music school in Porto fitted guards on eight teaching pianos after two key beds were damaged by pupils leaning on the keys with instrument cases. The first version sat 25 mm above the key tops and was removed by staff within a month.

Clearance and span on an acrylic piano key guard

Height above the keys

  • Clearance: 40 to 50 mm above key tops
  • Side cheeks: 5 mm, resting on the key bed
  • Access: hinged section over the tuning pins
  • Edge: rounded, no sharp lip at the front

The height is the whole design. A guard low enough to be struck during a stretch is uncomfortable and gets taken off; a guard high enough to be out of the hand path protects the keys without being noticed.

Hinged access for tuning

A technician needs the lid clear to tune. A hinged front section that lifts and stays up on a stay arm lets the guard remain fitted between services, and it avoids the habit of removing the whole panel and leaving it off.

Edge finish and cleaning

acrylic piano key guard shielding keys in a teaching studio

A rounded front edge keeps a sleeve from catching as a player sits down, and a polished edge wipes clean after a lesson. A sawn edge on a guard used daily turns chalky within weeks and then reads as dirty.

Fine edge work of this type is described in acrylic edge finishing.

Send your piano model, key span and fixing preference to oversales@rpplexiglass.com for a guard quotation.

Frequently Asked Questions

Does a key guard change the touch?

A guard sits 40 to 50 mm above the key tops and is not touched during play, so the action is unaffected. A guard set too low is struck by the hand during octave stretches.

How is the guard held in place?

On two side cheeks that sit on the key bed, with a hinged or removable section for tuning. Screwing into the case is avoided so the instrument is not altered.

Which thickness avoids a wobble?

4 mm across a full 88 key span, 3 mm for a compact teaching instrument. A single unsupported 1200 mm span in 3 mm flexes when it is lifted.