Polycarbonate hockey rink shielding is specified by where it stands, not by the size of the hall, because the puck energy behind a goal is several times what it is along the side boards.
A rink in northern Sweden replaced acrylic shielding after two seasons of crazing and edge cracking. The replacement went to 10 mm polycarbonate behind both goals, clear, in aluminium channels with a rubber gasket.
Height and thickness for polycarbonate hockey rink shielding
- Above dasher: 900 mm to 1200 mm of clear panel
- Behind a goal: 10 mm full height
- Side boards: 6 mm to 8 mm
- Temperature range: down to minus 30 C service
Height above the dasher is set by spectator sightlines and by puck trajectory, which is why the goal end runs full height and the sides do not. Thickness follows the same logic.
Cold, impact and the fixing detail
At minus 15 C on the ice surface, a rigid fixing loads a panel at every bolt hole. A channel with a gasket lets the panel deflect and return, which is how the material is designed to absorb energy.
Clarity that survives a season
Arena air carries skate dust and condensation, and a clear panel that is wiped with the wrong cleaner crazes within a season. A pH-neutral cleaner and a squeegee routine keep the shielding readable from the stands.
Surface protection and hard coat options are compared in polycarbonate scratch resistance.
Send your rink perimeter, board height and climate data to oversales@rpplexiglass.com for a quotation.
Frequently Asked Questions
Which thickness for rink shielding?
6 mm for the lower band above the dasher and 10 mm for the full height panel behind a goal. Impact energy near a goal is the case that sets the number.
Does cold make polycarbonate brittle?
No, that is one reason it is chosen. Polycarbonate keeps usable impact strength well below freezing, while acrylic and glass become the wrong answer in an ice hall.
How is a panel fixed so it can flex?
In a channel with a gasket rather than bolted rigid at every edge. A panel held tight at all four edges transfers every puck hit straight into the fixing.
