Acrylic Jewelry Display: Boutique Case

A boutique owner sent photographs of her acrylic jewelry display case with a question that sounded like a material problem: the rings looked dull. The cause was not acrylic. It was a 5 mm clear tier sitting directly on a grey velvet pad, so every gemstone picked up the same flat grey bounce.

Acrylic jewelry display work is mostly about what the clear material sits on and how it is cut away. The plastic itself is the easy part.

Tier geometry and the acrylic jewelry display

  • Ring bars: 5 mm, 25 mm pitch for stacking
  • Necklace bust: 8 mm, 120 mm shoulder span
  • Tier steps: 40 to 60 mm, front edge polished
  • Base: 8 mm with felt or velvet inlay
acrylic jewelry display stands holding rings and necklaces in a boutique

Ring bars at 25 mm pitch give a jeweller room to pull one ring without disturbing the row. Wider pitch fills a case faster but hides the pieces behind each other.

Light, velvet and the acrylic jewelry display finish

Polished edges act as a light guide and glow along the tier edge, which reads as premium under spot lighting. Frosted edges kill that glow and give a softer, matte look that suits silver rather than gold.

The velvet question

Velvet inlay under a clear tier turns the bounce warm and rich, which is why most high street cases use it. A plain lacquered base under the same tier gives a colder, harder look that photographs badly on a phone.

River People cuts and polishes display sets to your case plan, in clear, frosted or colour matched cast. Send the range list and case size to oversales@rpplexiglass.com.

Send your range plan, case dimensions and finish preference to oversales@rpplexiglass.com for a quotation on display sets.

Boutique cases usually mix jewelry and cosmetics tiers, and the acrylic cosmetics display tiers shows how stepped shelving is dimensioned for both.

Frequently Asked Questions

Why does acrylic yellow in a shop window?

Standard cast acrylic carries UV absorber, but direct sun through glass still shifts it over two summers. Window pieces should be specified in UV stable grade.

What thickness for a necklace bust?

8 mm for a free standing bust, 5 mm for tiers inside a case. Anything thinner flexes when a chain is lifted off.

Can displays be made to a brand palette?

Yes, in translucent colours and with colour matched edges. A physical swatch is confirmed before production.