A hotel group replacing acrylic menu holders across eleven restaurants found the same line on every outlet review: menus were being handed over rather than standing, because the holders on the tables tipped when a guest opened the cover.
An acrylic menu holder is judged by how it behaves under a hand, not by how it looks in a catalogue photo. Two numbers settle most of that: base footprint against page size, and the thickness of the back panel.
Style, insert size and the acrylic menu holder base
- A5 single sheet: L style, 3 mm, base 90 x 60 mm
- A5 two sided: tent style, 3 mm, base 100 x 70 mm
- A4 single sheet: slanted back, 5 mm, base 140 x 90 mm
- Menu weight: 120 to 250 gsm paper, or 0.8 mm laminated card
The base decides stability. A 3 mm A5 holder with a 90 mm deep foot stays put when a diner lifts the menu; the same page in a 60 mm foot tips forward. Restaurants that buy on price usually buy the shallow foot and then complain about tipping.
Cleanliness and the acrylic menu holder edge
Holders are wiped with sanitizer after every seating and stacked wet at close. Fire polished edges stay clear under that routine; sawn edges go white within a month and read as scratched.
Branding that survives the wash cycle
Screen printing on the base holds for years because the base is not wiped as often as the front. Printing the logo on the front face is what fails first, at the top edge where cloths catch.
River People makes holders to your menu trim size in cast acrylic, with base printing or engraving and packing per outlet. Send the trim size and quantity to oversales@rpplexiglass.com.
Send your menu trim size, quantity per outlet and logo file to oversales@rpplexiglass.com for a quotation on holders with printed or engraved branding.
Holders are cut from full sheets to a menu trim size, and the acrylic sheet cut to size service note explains the tolerance we hold on small repeat parts.
Frequently Asked Questions
Which acrylic menu holder style suits a restaurant?
L shape for single sheets on tables, tent style for two sided menus, and a slanted back for A4. Table usage decides the style, not the budget.
What thickness should the holder be?
3 mm for A5 and smaller, 5 mm for A4 and for any holder that is handled by guests at every seating.
Can the holder be branded?
Yes, by screen printing on the base or engraving on the back panel. Print on the front face wears off at the top edge within months.
