An acrylic office cubicle screen solves a social problem more than an acoustic one: it stops conversations carrying across a bank of desks while letting people see that a colleague is available.
A software company in Pune installed 60 pods on a demountable grid. The screens were specified at 1500 mm with a full frosted face, and the first feedback was that the office felt dark and that staff were standing up to see if a teammate was at their desk.
Acrylic office cubicle panel height and frost band
- Panel height: 1200 mm seated privacy, 1500 mm standing
- Frost band: 300 to 450 mm at seated eye level
- Panel: 5 mm clear with frosted band
- Gap at floor: 10 to 15 mm for cleaning
The frosted band is the compromise. A band at 300 to 450 mm above the desk blocks eye contact when seated and leaves the top clear, so daylight and sightlines across the room survive. A fully frosted 1500 mm screen is a wall.
Fixings, demounting and cleaning
Clamp feet allow a pod to be re-planned in an afternoon, which is the difference between a flexible office and a fit-out that gets abandoned. A clamp foot needs a 10 mm gap at the floor and a panel that is not bonded to anything.
Cleaning is the same trap as any acrylic fit-out: alcohol wipes used daily will craze the machined edge within a year. A mild detergent and a soft cloth keep a screen clear; annealing the cut edges helps.
For the desk-level screens used in hot-desking layouts, acrylic sneeze guards covers the clamp and bracket options in more detail.
Send your pod layout, panel sizes and demount requirement to oversales@rpplexiglass.com for a screen quote.
Frequently Asked Questions
What thickness acrylic office cubicle screens?
5 mm for fixed dividers under 1200 mm high, 8 mm for freestanding panels or anything over 1500 mm. Panel height and the fixing method decide the gauge.
Does an acrylic screen reduce noise?
Only marginally. A single 5 mm sheet stops airborne spray but not sound; the acoustic benefit comes from sealing the gaps and adding an absorptive panel, not from the acrylic itself.
Can acrylic cubicle panels be demounted weekly?
Yes with clamp feet and a 10 mm edge gap. Hinged or bonded installations are permanent; clamp-mounted panels can be lifted out and re-set in a different layout without damage.