A buyer compared acrylic sheet 10mm price from two suppliers and could not explain the gap, because the two quotes were for different products. One was cell cast with a tight tolerance; the other was extruded with a looser tolerance and a smaller panel.
The factors behind the price
Ten millimetres alone does not set a price. The grade — cell cast versus extruded — changes cost because cell cast is slower and more uniform. The panel size changes the price because bigger panels waste more and cost more to cast. Tolerance, colour, UV stabilisation and quantity all move the number. A buyer who compares only the thickness is comparing different products and will misread the market.
Compare like for like
- Grade: cell cast or extruded.
- Panel size and thickness tolerance.
- Colour, UV stabilisation and surface finish.
- Quantity and whether it is a standard or custom size.
How the wider pricing picture is built is in the what factors affect acrylic sheet price guide, and the per-area benchmark in acrylic sheet price per square foot.
Frequently Asked Questions
Q: Why do acrylic sheet 10mm price quotes differ so much?
A:Because they may be for different grades, panel sizes, tolerances or quantities. Comparing only the thickness ignores these, so the lower quote may be a different product.
Q: Is cell cast acrylic sheet 10mm always more expensive than extruded?
A:Usually yes, because cell cast is slower and gives tighter thickness and better clarity. The premium is justified when uniform thickness and low stress matter.
For a cast acrylic or polycarbonate sheet quoted to your thickness, size and quantity, email oversales@rpplexiglass.com with the material, thickness, dimensions, quantity and destination port.