Half the fabrication headaches we see start with a buyer ordering “acrylic” without pinning down the acrylic sheet dimensions. The sheet arrives, the panel layout does not fit, and a whole sheet gets scrapped. Getting the dimensions right up front is the cheapest step in any project.
The standard dimensions you will meet
| Format | Dimensions |
|---|---|
| Common stock | 1220 x 2440 mm (4×8 ft) |
| Wide format | 1250 x 2450 mm, 1830 x 3660 mm |
| Oversized / custom | Cut to your panel size |
How to specify dimensions that fit
Give us the finished panel size, the thickness, and the tolerance you can live with. Where a standard sheet wastes too much material, we cut to size so you buy only what the job uses. For big surfaces, consider a wide or oversized sheet to reduce seams and frame lines.
For the full size range and cut-to-size service, see custom size acrylic sheets, and for the standard gauge tolerances, acrylic sheet thickness tolerance.
Frequently Asked Questions
Q: What is the standard acrylic sheet size?
A: The most common stock size is 1220 x 2440 mm; wide formats such as 1250 x 2450 mm and 1830 x 3660 mm are also available.
Q: Can acrylic sheets be cut to custom dimensions?
A:Yes, we supply clear acrylic cut to your finished panel size so you do not buy more material than the job needs.
For a project-specific quotation on thick or oversized cast acrylic sheets, email oversales@rpplexiglass.com with your thickness, sheet size and quantity.