Acrylic Sunglasses Display: Optical Stand

Acrylic sunglasses display stands are judged by whether a customer can pick a frame up, try it, and put it back without the next customer seeing a smudge where the lens rested.

An optical chain in Milan moved from flat clear shelves to bridge support stands after returns for hairlines rose. The frames were not scratched in use; they were scratched by the shelf.

Bridge support geometry in an acrylic sunglasses display

Holding a frame by the nose and temples

  • Bridge support: 8 mm wide, 20 mm high
  • Temple rests: two, 70 mm apart
  • Slot spacing: 95 mm for wide frames
  • Tier pitch: 110 mm

Support at the bridge mirrors how the frame sits on a face, so the lens never touches the stand. It also holds a wrap frame at the angle it is worn, which is the angle that sells the shape.

Polish, edges and price tags

acrylic sunglasses display stand in an optical shop

A polished acrylic edge reads bright against a lens and cannot scratch it, while a sawn edge leaves a burr that does. Price tags belong on a small plate behind the frame, not on the lens.

Cleaning a counter that sees sun

Sunglasses counters sit near glazing and are wiped often. A pH-neutral cleaner on a microfiber cloth is enough, and alcohol wipes should be avoided because they haze a polished surface over months.

Tiered display construction is covered in acrylic perfume display units.

Send your frame count, counter size and store layout to oversales@rpplexiglass.com for a quotation.

Frequently Asked Questions

Which thickness for a sunglasses stand?

5 mm for a three tier counter unit, 8 mm for a floor unit or a wide tier that spans above 500 mm without a support.

How is a frame held without marking the lens?

Support at the nose bridge and the temples rather than on the lens face. A stand that rests on the lens leaves a mark that a customer reads as a scratch.

Should the stand be clear or tinted?

Clear for a bright counter where frames carry the colour. A tinted or black base is chosen where the shop wants the stand to read as part of the fixture.