Acrylic magazine rack pockets are sized by the thinnest issue a publisher sends, not by the average, because a thin issue in a deep pocket folds and hides its own cover.
A hotel lounge in Singapore used 60 mm pockets for twelve titles. Two monthly magazines curled at the corner within a week, and the fix was a 70 mm pocket with a 12 mm front lip.
Pocket depth and lip on an acrylic magazine rack
- Pocket depth: 70 mm standard, 90 mm for stacked copies
- Front lip: 12 mm to stop a thin issue sliding out
- Thickness: 5 mm wall pocket, 8 mm freestanding
- Spacing: 40 mm between pockets
The lip is doing the work in a rack. It holds a light issue upright without gripping it, so a reader can take one out with two fingers while the rest stay square.
Wall fixing and the freestanding case
A wall rack carries only paper weight, but it is pulled outward every time an issue is removed. Fixings into a stud or a masonry anchor take that pull; adhesive pads do not survive a busy lounge.
Restocking without sorting
Staff restock by title, so pockets that are labelled at the base and spaced in title order cut the task to a minute. A rack designed by appearance alone tends to be restocked by pushing everything back into the nearest gap.
Retail display layout principles are covered in acrylic retail signage and display.
Send your title count, issue sizes and layout to oversales@rpplexiglass.com for a quotation.
Frequently Asked Questions
Which thickness for a magazine rack?
5 mm for a wall pocket holding a single issue, 8 mm for a freestanding unit or any pocket that holds three or more copies.
How deep should a pocket be?
70 mm front to back for a standard issue and 90 mm where several copies sit behind each other. A shallow pocket lets a thin issue fold over.
Do freestanding racks need a weighted base?
Yes for anything above 1.2 m. A clear rack is light, and a light tall rack moves when a reader pulls an issue out at an angle.
