A 90 seat restaurant opened with flat acrylic table number holders and replaced them within a month. Servers could not read a table number from the pass, and every order was confirmed twice at the table.
An acrylic table number holder is a service tool. Its height, its angle and the legibility of the digits at four metres decide how quickly a table is identified.
Height, angle and the acrylic table number holder
- Standing holder: 5 mm, 200 mm tall, 15 degree lean
- Flat holder: 3 mm, 90 x 60 mm, 5 mm foot
- Digit height: 40 mm minimum for reading at 4 m
- Insert: 1 mm card or reverse printed directly
Two hundred millimetres with a slight lean puts the digits in the server line of sight without blocking the table. Flat cards are legible only from directly above, which is why they fail in a busy room.
Print, wiping and the acrylic table number holder
Reverse printing puts the ink inside the acrylic, where it is protected from cloths and sanitizer. Surface printed digits lose their edges within a season at a busy site.
Numbering a whole floor consistently
Ranges are printed in one run so that digit weight and spacing match across tables. Reordering in small batches later is what produces a floor where table 14 looks different from table 4.
River People prints holders in full ranges with matched fonts and consistent heights. Send the table count and font file to oversales@rpplexiglass.com.
Send the number range, table count and font file to oversales@rpplexiglass.com for a quotation on printed holders.
Service accessories are usually ordered as one range, and the acrylic tip box build shows how small bonded parts are detailed for table use.
Frequently Asked Questions
Standing or flat table numbers?
Standing holders read across a room and suit large restaurants. Flat cards suit small tables where a stand blocks conversation.
What height should a standing holder be?
180 to 220 mm above the table. Higher reads across the room and interferes with service.
How should numbers be printed?
Reverse printed on the inner face, so the digits are protected by the sheet and survive wiping.
