PETG Display Box: Retail Packaging

PETG display box converters rarely argue about clarity, because the material settles that, and they argue about the crease line, because that is where a clear box starts to look white on a shelf.

A cosmetics brand in Guangzhou moved a counter display from PVC to 0.5 mm PETG and kept the same dieline. The box read noticeably clearer under store lighting, and the folds needed scoring to avoid whitening.

Crease and fold practice for a PETG display box

Scoring before folding, not after

  • Thickness: 0.5 mm counter, 1 mm stacked
  • Score depth: 0.3 mm on a crease line
  • Corner radius: 3 mm minimum
  • Lid: tuck top or a separate sleeve

A scored line confines the fold to a controlled radius, which keeps the corner clear instead of stress whitened. Corners below a 3 mm radius crack in handling before the box reaches a shelf.

Stacking, shelf life and the product inside

clear PETG display box holding a retail product

A 1 mm box survives a warehouse stack; a 0.5 mm box is a display piece and is handled one at a time. Specifying the thin wall for a stacked item is the mistake that shows up as crushed corners in transit.

Clarity and food contact

Where the box holds a food item directly, the grade has to be the food contact one and the converter needs the declaration. A general purpose PETG sheet is clear and cheap and is not the same input.

Food contact grades and declarations are covered in PETG sheet for food contact.

Send your product dimensions, pack quantity and artwork to oversales@rpplexiglass.com for a quotation.

Frequently Asked Questions

Which thickness for a display box?

0.5 mm for a light box that sits on a counter and 1 mm for one that is stacked or handled in a warehouse.

Why PETG rather than PVC?

PETG is clearer, does not yellow and is recyclable in stream 1. PVC is cheaper and turns a blue grey cast under shelf lighting over time.

Can a PETG box be folded without cracking?

Yes, on a crease line that is scored or heat formed. A fold across an unscored sheet at 0.5 mm whitens along the edge, which is visible on a shelf.