Polycarbonate Dairy Parlour Window

A dairy unit replaced its polycarbonate dairy parlour windows three times in five years before anyone looked at the cleaning chart. The morning wash used a caustic at double the recommended dilution, and the windows were being sprayed directly at 60 C.

The material was blamed for two of those replacements and the wash routine for the third. A polycarbonate dairy parlour window survives the environment when both the sheet and the frame are chosen for it.

Chemical exposure and the polycarbonate dairy parlour window

  • Window: 6 mm clear polycarbonate, hard coated face inside
  • Frame: stainless or coated steel with EPDM gasket
  • Fixing: stainless bolts, 2 mm clearance, sealed washers
  • Washdown: rinse within 10 minutes of caustic application
polycarbonate dairy parlour window above a milking parlour

Caustic at washdown strength is tolerated by polycarbonate. The damage comes from concentration and dwell time, so the rinse step is the control, not the sheet grade. Acid washes used for milk stone removal are milder on the sheet and harsher on uncoated frames.

Visibility, condensation and the polycarbonate dairy parlour window

Parlours are wet rooms, and condensation on the inner face is normal. A 5 degree slope on the sill and a drip channel keep water off the gasket line, which is where mould establishes first.

Observing the herd through the window

Stockmen watch teat placement and udder condition through the parlour window rather than walking the pit. A clear 6 mm panel at eye height with a hard coated inner face stays readable after a year of washdown; an uncoated panel collects fine scratches that scatter light.

River People supplies framed parlour windows with hard coated sheet and stainless fixings. Send the parlour layout to oversales@rpplexiglass.com.

Send the parlour layout, cleaning chemicals and herd size to oversales@rpplexiglass.com for a quotation on framed window units.

Repeated washdown is an abrasion routine, and our polycarbonate scratch resistance guide explains which surface options survive it.

Frequently Asked Questions

Will caustic wash damage polycarbonate?

Diluted caustic at washdown strength is tolerated. Concentrated product left on the surface etches it, so rinse is part of the routine.

Why not acrylic in a parlour?

Acrylic crazes under repeated alkaline cleaning and solvent based teat dips. Polycarbonate is more tolerant in a wet, chemical environment.

What thickness for a 900 mm opening?

6 mm up to 900 mm, 8 mm above that or where cattle can push against the window.