Three cover materials get quoted for the same machine: fabric, PVC and polycarbonate. Fabric is cheapest and hides the machine, while a polycarbonate dust cover keeps it visible, which defeats the purpose on a shop floor where the next operator wants to see whether the table is clear.
A polycarbonate dust cover keeps the machine visible and takes the handling that a shift change produces. The engineering question is span against thickness, then hinge detail.
Span, thickness and the polycarbonate dust cover
- Span to 400 mm: 4 mm
- Span 400 to 700 mm: 6 mm
- Span above 700 mm: 8 mm or a light steel frame
- Hinge: 40 mm piano hinge, riveted not screwed
A 4 mm cover at 600 mm span bows about 12 mm under its own weight and rests on the spindle head. Operators then stop using the cover, and the dust comes back.
Hinge, latch and the polycarbonate dust cover in daily use
Riveted piano hinges spread the load along the edge and survive thousands of cycles. Screwed hinges loosen and pull out of the sheet at the hole, which is where a crack begins.
Clearance and condensation
Twenty millimetres of clearance above the tallest part stops the cover from acting as a lid on a hot machine. Two slots at the high point let warm air out, which is what prevents a fogged inner face on a Monday morning.
River People cuts and forms covers to machine outlines, with hinges, latches and vent slots fitted. Send the machine drawing to oversales@rpplexiglass.com.
Send the machine outline, cover span and access direction to oversales@rpplexiglass.com for a quotation on cut and formed covers.
Covers and guards sit on the same machines, and the polycarbonate machine safety guards guide covers fixing practice for both.
Frequently Asked Questions
Why polycarbonate rather than PVC for a dust cover?
PVC hoods go brittle with age and crack at the hinge. Polycarbonate takes repeated lifting without cracking and stays clear.
What thickness for a 600 mm span?
6 mm. A 4 mm cover over 600 mm sags under its own weight and touches the machine.
Does the cover need ventilation?
Two 8 mm slots at the high point stop condensation forming on the inner face over a cold weekend.
