Wind load and stone strikes arrive at the same panel, and a polycarbonate motorcycle windshield is specified around how it is bolted rather than around how tall it looks in a product photo.
A rider in Cape Town fitted a 640 mm tall screen to a adventure bike for a 4 000 km trip. It cracked outward from the upper mounting bolt on day three, at a hole that had been drilled 8 mm from the edge.
Mounting detail on a polycarbonate motorcycle windshield
- Hole edge distance: 20 mm on a tall screen
- Washer: rubber backed, 15 mm outside diameter
- Torque: set to the fairing spec, not tight
- Hole diameter: 1 mm over the bolt
A rubber backed washer spreads the clamp load and lets the panel move slightly instead of fighting the fairing. A bolt tightened hard onto a polymer panel is a crack waiting for one cold morning.
Height, bend and buffeting
Screen height is a helmet buffeting question. A screen that ends at chin height puts turbulent air at the helmet base, and the fix is usually a taller screen with a slight rearward bend at the top, not a thicker one.
Bending a tall screen
A formed panel holds a curve that keeps a tall screen from folding at highway speed. Cold bending is adequate for a gentle curve; a strong flip at the top edge is formed over a mould so the bend stays where it was designed.
Sun exposure and clarity
A screen is a UV target, and polycarbonate resists impact better than it resists long term UV unless it is protected. A coextruded UV layer on the outer face keeps a screen clear over years of parking in the sun, and it costs less than replacing a hazed panel.
Cutting and edge treatment for screens is covered in polycarbonate cut to size.
Send your bike model, screen height and quantity to oversales@rpplexiglass.com for a windshield quotation.
Frequently Asked Questions
Which thickness for a touring screen?
4 mm for a standard screen, 5 mm for a tall screen above 600 mm or a bike ridden at sustained highway speed. The mounting holes are where thickness matters most.
How far should a hole be from the edge?
At least 15 mm, and 20 mm on a tall screen. A hole closer than that concentrates load and the panel cracks outward from the bolt under vibration.
Does polycarbonate need a hard coat?
For a bike that is cleaned with a cloth at every stop, yes. A hard coated outer face resists the fine scratches that turn a screen hazy under low sun.
