A generator enclosure manufacturer moved from steel to an ABS battery box design for a weight saving and came back within a season with a failure report: boxes were bowing at the base and the batteries were sitting on their own spill trays.
The report pointed at the base, not the walls. An ABS battery box carries a concentrated load in the middle of a flat panel, and a formed rib under that load is worth more than two millimetres of extra wall.
Base load and the ABS battery box
- Battery to 10 kg: 3 mm walls, 4 mm base
- Battery to 25 kg: 4 mm walls, 5 mm base with rib
- Rib: 10 mm depth, running across the short side
- Hold down: strap slots, 12 mm, formed not drilled
A formed rib under the base spreads the load into the walls and removes the bow entirely at 25 kg. Adding wall thickness instead does less for the same material cost.
Acid, heat and the ABS battery box in service
Dilute sulphuric spill is tolerated; standing concentrated acid in a base without a tray is not. Charging heat is the second factor, and boxes mounted next to a charger need the vent slots at the top to be genuinely open.
Ventilation slot sizing
Two top slots and one base slot on opposite sides let hydrogen disperse instead of collecting under a lid. A sealed box around a charging battery is the one configuration to avoid.
River People forms battery boxes with ribbed bases, strap slots and vent details to your envelope. Send the battery size and mount position to oversales@rpplexiglass.com.
Send the battery envelope, mounting position and volume to oversales@rpplexiglass.com for a quotation on formed boxes.
Deep box draws are where wall thickness falls away, and the ABS vacuum forming draw guide explains planning draw ratio against starting gauge.
Frequently Asked Questions
Is ABS resistant to battery acid?
It handles dilute sulphuric acid spill and mist well. Concentrated acid left standing in the base will attack it, so a spill tray is used inside.
What thickness for a 25 kg battery?
4 mm walls with a 5 mm base and a formed rib under the base. 3 mm suits small batteries under 10 kg.
How should the box be ventilated?
Two slots at the top and one at the base on opposite sides, sized to let hydrogen disperse rather than accumulate.
