Cool box performance is a foam question wrapped in a shell problem, and an ABS cooler box is specified by the abuse the lid takes between the shop and the beach.
A rental operator in Queensland bought 120 boxes in 3 mm ABS with a flat gasket land. Lid seals failed within a season on every box that had been sat on, and the redesign moved the gasket into a groove.
Lid and gasket detail on an ABS cooler box
- Gasket: 4 mm, seated in a groove
- Latch: cam type, two off, pulls downward
- Lid wall: 4 mm above 40 litres
- Hinge: pin type, not a living hinge
A groove holds the gasket where it was designed even when the lid flexes, and a cam latch pulls the lid down onto the seal instead of sliding it sideways. That pair of details is what separates a box that keeps ice for a day from one that leaks in a car boot.
Wall, foam and hold time
Hold time comes from the foam depth between the shells. A 40 mm foam wall gives a working day of ice in moderate heat, and a thicker ABS skin takes space from the foam rather than adding performance.
Hinge, latch and wet hands
A pin hinge outlasts a moulded living hinge that is opened with wet hands in cold weather, and a cam latch can be operated with one hand while the other holds a drink. Hardware that needs two hands is hardware that gets left open.
Shell forming and enclosure detail is covered in ABS equipment enclosures.
Send your capacity, insulation target and quantity to oversales@rpplexiglass.com for a cooler quotation.
Frequently Asked Questions
Which thickness for a portable cooler?
3 mm for a 20 litre box, 4 mm for 50 litres and above where the lid is sat on. The lid is the part that takes the load, not the base.
How is the lid kept sealed?
A gasket in a groove and a latch that pulls the lid down rather than across. A gasket pressed on a flat land leaks as soon as the lid flexes under a seated passenger.
Does ABS insulate?
No. ABS is the shell; insulation is the foam between the walls. Wall thickness is set by the foam depth needed for the hold time, so a thicker shell does not improve cooling.
