Acrylic Donor Wall: Hospital Foyer

A hospital foyer wall carries the names of people who chose to give, and an acrylic donor wall is a legibility project before it is a design project.

A foundation in Toronto installed 320 names on clear tiles with raw engraving. Photographs of the unveiling showed half the names unreadable at an angle, and every tile had to be removed and refilled.

Legibility rules for an acrylic donor wall

Engraving and fill

  • Cut depth: 1.5 mm, filled
  • Fill: paint or a dark backing sheet
  • Cap height: 20 mm for a wall read at 1.5 m
  • Name length: allow 45 characters per tile

An unfilled engraving on clear acrylic catches light and disappears from most angles. Fill converts the cut into a line of contrast, and a dark backing sheet behind a clear tile does the same job for a whole panel at lower cost.

Tile grid and spare positions

A grid that reserves empty positions at the end of each block means a new name joins the wall without a rebuild. Foundations that plan for ten years of giving treat the empty positions as part of the design rather than a gap.

Fixing and cleaning in a public foyer

acrylic donor wall with engraved name tiles in a hospital foyer

Standoffs hold tiles off the wall and give the wall a shadow line that reads from across a foyer, and they allow a tile to be replaced without touching its neighbours. In a hospital, a surface that wipes clean without removing the names is also a requirement, which points to a polished face and a sealed edge.

Sign construction for public buildings is covered in acrylic signage for public and retail spaces.

Send your name list, wall dimensions and update frequency to oversales@rpplexiglass.com for a quotation.

Frequently Asked Questions

Which thickness for a donor tile?

8 mm for engraved or cut names, 10 mm where tiles are large or mounted on standoffs. A thin tile on a standoff shows its edge shadow and looks like a label rather than a plaque.

How are new names added later?

Modular tiles on a grid, with spare positions reserved at the design stage. Rebuilding a wall for one name costs more than reserving a block of empty positions.

Does engraving read well on clear acrylic?

Filled engraving does. A raw engraved line on clear sheet almost disappears at an angle, so the cut is filled with paint or a contrasting sheet behind it.