An acrylic portfolio case is opened on a table during a meeting, and the first thing the audience notices is whether the stack lies flat and whether the edges catch the light cleanly.
An architecture graduate in Manila carried a 5 mm case through four interviews. The third interviewer asked about the case, not the work, because the corners were square and sharp enough to catch on a bag lining.
Sheet capacity against thickness in an acrylic portfolio case
- Up to 8 sheets: 3 mm
- 8 to 15 sheets: 3 mm with a spine band
- 15 to 25 sheets: 5 mm
- Corner radius: 6 mm minimum
Corner radius is the detail that changes how the object feels. A 6 mm radius stops bag wear and removes the sharp point that catches a lining, and it costs one extra routing pass.
Hinge and spine options
A post screw spine lets pages be added the night before an interview; a solvent bonded spine looks more finished but locks the content. For a case that travels with a changing body of work, post screws win.
Print protection
A polished inner face and a 2 mm gap above the stack stops the print from being embossed. Where the case is used as a presentation surface, a clear front sheet in 3 mm protects the top print from fingerprints without hiding it.
Sheet sizing and edge tolerances for this kind of build are described in acrylic sheet cut to size.
Send your sheet size, page count and quantity to oversales@rpplexiglass.com for a case quotation.
Frequently Asked Questions
Which thickness keeps the case flat?
3 mm covers up to 15 sheets; 5 mm beyond that. A thin case bows under its own print stack, and a bowed case will not sit flat on a table during a presentation.
How are the pages held in?
Post screws through a punched margin or a spine band. Post screws let pages be replaced; a bound spine looks more finished but fixes the sheet count.
Will the acrylic mark the prints?
Not if the inner face is clean and the print is on stock above 200 gsm. A sharp sawn inner edge can emboss a soft print under pressure, so inner edges are polished.
