Acrylic Tissue Box Cover: Hotel Spec

Housekeeping at a 190 room hotel reported cloudy acrylic tissue box covers across two floors within eight months. The covers were 3 mm cast, correctly made, and had been wiped with the same ammonia glass cleaner used on the bathroom mirrors. Cast acrylic hazes under repeated ammonia, and the haze does not polish out without a workshop.

The material was not the problem. The instruction card was.

Internal clearance and the acrylic tissue box cover fit

  • Internal: 125 x 125 x 135 mm for a 120 mm cube box
  • Wall: 3 mm cast, top 4 mm cast
  • Slot: 90 x 22 mm, rounded ends, 3 mm radius
  • Base skirt: 12 mm, sits over the box edge without touching
acrylic tissue box cover on a hotel bathroom shelf

A cover cut to the box dimension exactly will not accept the box with its wrapper on, and a wrapper pushed into a tight cover tears at the corner where the guest sees it. Five millimetres of internal clearance is the working number.

Slot geometry and the acrylic tissue box cover in use

The slot should pass one tissue at a time. A 90 mm slot with rounded ends lets a hand pull straight up; a rectangular slot cut with square corners concentrates stress exactly where a tissue is dragged across it, and that corner is where the first crack appears.

Cleaning and the acrylic tissue box cover finish

A neutral detergent and a soft cloth keep cast acrylic clear indefinitely. Ammonia, alcohol above 30 percent, and cream abrasives all haze the surface. Where a hotel cannot control the cleaning chemical, a polycarbonate cover is the more forgiving choice, at the cost of a slightly warmer tone.

River People produces covers to your box size with polished slots, engraved room numbers and a cleaning instruction card per batch. Send room count and box size to oversales@rpplexiglass.com.

Send the box size, room count and cleaning products used to oversales@rpplexiglass.com for a quotation on covers with engraved room numbers.

Other hotel room fittings built to the same polishing standard are covered in acrylic room number signs for hotel interiors.

Frequently Asked Questions

What internal size fits a standard cube tissue box?

125 x 125 x 135 mm internal for a 120 x 120 x 130 mm cube box, which leaves 5 mm for the wrapper.

Why does a cover go cloudy?

Ammonia and abrasive cream cleaners. Cast acrylic hazes at the surface and cannot be polished back in a hotel laundry.

Can covers be engraved with a room number?

Yes, on the base skirt at 5 mm cap height, where it stays readable without breaking the face.