Fleet managers replace a polycarbonate forklift windshield on a schedule that has almost nothing to do with breakage. The panel is usually intact. What it has collected is a haze of wiper scratches and a milky band where the operator looks through it, and both of those are coating decisions made at order time.
The impact argument for polycarbonate is real, but on a forklift the screen rarely fails from a blow. It fails from the wiper.
Hard coat and the polycarbonate forklift windshield service life
- Coating: hard coat on both faces, 3 to 5 micron
- Thickness: 6 mm warehouse, 8 mm yard and dock work
- Wiper: dry wipe only, no solvent spray against the screen
- Replacement interval: 3 to 5 years coated, under 1 year uncoated
An uncoated polycarbonate screen reaches visible haze at around 8,000 wiper passes on a dusty yard. A hard coated screen of the same thickness reaches it at roughly 40,000, which is the difference between replacing a screen once and replacing it five times.
Cold store performance and the polycarbonate forklift windshield
Polycarbonate keeps its impact strength to about minus 40 C, which is why it is the only sensible glazing for a freezer aisle. The catch is thermal contraction: at 6 mm and a 900 mm panel, a 40 C drop moves the sheet about 2.3 mm. A screen bolted with no clearance has nowhere to move, so the edge takes the load and a crack starts at a bolt hole. Three millimetres of clearance per metre, with oversize holes and a rubber gasket, removes the problem.
Cab fitting and the polycarbonate forklift windshield seal
The seal does two jobs. It keeps dust off the inner face, and it keeps the panel from bearing on the frame. A 3 mm EPDM gasket compressed to 2 mm gives both without pinching the sheet. Silicone sealant against a polycarbonate edge is a mistake, because the solvent carrier attacks the edge and produces crazing that runs inward under load.
River People supplies hard coated screens cut to your cab opening with gaskets and drilled edge patterns. Send the machine model and operating temperature to oversales@rpplexiglass.com.
Send the cab opening dimensions, machine model and operating temperature to oversales@rpplexiglass.com for a quotation with one trial screen.
Cab glazing that has to be swapped on a service interval is covered in polycarbonate forklift window replacement.
Frequently Asked Questions
Hard coated or plain polycarbonate?
Hard coated for a forklift. Uncoated sheet scratches at a wiper pass count in the low thousands and the replacement interval drops to under a year.
What thickness for a warehouse cab?
6 mm for an enclosed warehouse truck, 8 mm where the cab sees yard work and pallet contact at the screen.
How much edge clearance?
3 mm per metre of panel length. A screen cut to the frame dimension exactly will buckle and crack in a cold store at minus 25 C.
