Trail riding is an abrasive environment, and a polycarbonate ATV windshield has to take a branch across the top edge, mud sprayed from the front tyres and a wash down at the end of the day without going cloudy.
A rental fleet in Alberta fitted 18 quad screens for a summer season. Seven came back with a scratched upper face, all from riders cleaning mud off with a glove at the trail head.
Polycarbonate ATV windshield build and hard coat
- Summer screen: 4 mm clear
- Year round screen: 6 mm
- Outside face: hard coated where mud is frequent
- Top edge: 40 mm above the rider eye line
The hard coat is the difference between a screen that reads clear after a season and one that looks fogged. It adds cost, and on a rental fleet it pays back within the first season of glove cleaning.
Clamp fixing and bar compatibility
Clamps sized to the bar diameter with a rubber insert stop the screen from rotating and stop the bars from being marked. A universal clamp that fits every bar is the one that slips at speed and puts the screen at an angle in the rider view.
Height and spray
A screen 40 mm above the eye line keeps spray from the front tyres off a helmet visor without putting a bar across the rider view. Taller screens that look protective on the trailer often sit exactly in the line of sight on a rough trail.
The same forming and clamping logic applies to marine screens covered in polycarbonate boat windshields.
Send your quad model, bar width and quantity to oversales@rpplexiglass.com for a windshield quote.
Frequently Asked Questions
Which thickness for an ATV windshield?
4 mm for a summer trail screen, 6 mm for year round use with branches and cold. Thicker sheet resists a branch strike and holds shape in freezing conditions.
Does mud scratch polycarbonate?
Cleaning mud with a dry cloth does. Rinsing before wiping, and a hard coated face on the outside, keeps the surface clear over a season of trail riding.
