A guard booth is the one building on a site that is occupied all night, and polycarbonate guard booth glazing is selected against a threat list rather than against a brochure thickness table.
A logistics yard in Durban fitted a booth with 6 mm clear panels. A thrown brick in the second month cracked a side pane, and the replacement specification moved to 10 mm on the road facing side only.
Thickness by exposure on polycarbonate guard booth glazing
Which face takes what
- Road facing: 10 mm, thrown objects
- Yard side: 8 mm, vehicle contact
- Rear: 8 mm with a shade line
- Frame: aluminium, gasket under each pane
Specifying one thickness for the whole cabin wastes money on the rear and under protects the road face. A threat list by elevation is the professional approach and it also keeps the cabin weight sensible for a prefabricated unit.
Frame and seal in a prefabricated cabin
A cabin assembled in a factory and lifted onto a truck flexes in transit, and a pane bedded on sealant alone will leak at the first lift. A gasket under an aluminium frame tolerates that movement, and it lets a pane be replaced on site after an incident.
Heat, view and the working shift
A sealed booth with clear panels heats up fast, and a guard who cannot see out because of condensation is a guard who opens the door. Vents, a shade line on the sunny elevation and a clear panel that can be wiped are the practical package.
Security glazing selection across a whole site is covered in bullet resistant window specification.
Send your cabin drawing, site risk assessment and quantity to oversales@rpplexiglass.com for a glazing quotation.
Frequently Asked Questions
Which thickness for a site guard booth?
8 mm for a low risk yard, 10 mm or a laminated build where the site has a history of thrown objects. Security glazing is specified from the risk assessment, not from the cabin size.
Why not glass in a booth?
Glass gives a better view and fails in one strike. A booth has to keep working after an incident, and polycarbonate holds the pane in place with a mark rather than a hole.
How does a sealed booth avoid overheating?
Ventilation and shading rather than thicker glazing. A small cabin with sealed panels reaches an unusable temperature by mid morning, so vents and a shade line are part of the glazing design.
