Polycarbonate Turnstile Screen: Gate Fit

Entry gates process people at a rate, and a polycarbonate turnstile screen has to protect a card reader while staying out of the sweep of an arm that turns thousands of times an event.

A stadium in Lyon added screens beside 24 turnstiles after readers were damaged by bags. The first fit put the screens 30 mm from the arm, and within two matches every screen had a scuff band across the middle.

Clearance and fixing on a polycarbonate turnstile screen

  • Clearance to arm: 60 mm minimum
  • Mounting: stainless post, 2 bolts per side
  • Thickness: 5 mm reader cover, 8 mm crowd side
  • Edge: 5 mm radius, gap under 8 mm

The scuff band is the giveaway of a clearance error. Moving a screen 60 mm clear of the arm removes the contact, and it also keeps a coat sleeve from being dragged as a person passes through.

Crowd loading and the post

polycarbonate turnstile screen beside a stadium entry gate

A crowd does not strike a screen, it presses against it, and a screen fixed to a single post with two bolts takes that load as a twisting moment. A post with a bracket at the top and the bottom turns the load into compression, which a polymer panel handles far better.

Edge detail in a queue

A radiused edge and a small gap under the panel remove the finger trap and the sharp corner that a queue finds. Those two details cost a routing pass and they are what keeps a screen from becoming an incident report.

Hard coated panels for high traffic surfaces are covered in hard coated polycarbonate sheet.

Send your turnstile model, gate layout and event volume to oversales@rpplexiglass.com for a quotation.

Frequently Asked Questions

Which thickness beside a turnstile?

5 mm for a reader cover, 8 mm for a screen that a crowd can lean on. Crowd loading is the design case, and it arrives sideways rather than as a single impact.

How much clearance around the arm?

At least 60 mm to the rotating arm through its full sweep. A screen inside that clearance is struck on every rotation and marks within a season.

Is a clear screen a crowd hazard?

Only if it has a sharp edge or a gap that traps fingers. A radiused edge and a gap under 8 mm remove the two problems a crowd actually creates.