Polycarbonate Laser Safety Window: Cell

Polycarbonate laser safety window panels are bought against a wavelength, and the most common failure in the field is a window that was chosen by its tint rather than by its test data.

A metal fabricator in Sheffield fitted amber tinted windows to three fibre laser cells. The tint looked right and blocked nothing at 1064 nm, which came out during an insurance audit rather than during an accident.

Filter choice on a polycarbonate laser safety window

Match the window to the source, not the colour

  • Fibre laser: 1064 nm absorbing filter
  • CO2 laser: 10.6 micron blocking window
  • Blue diode: 450 nm filter
  • Thickness: 6 mm standard, 10 mm large opening

Each source needs its own filter data sheet, and the sheet should name the optical density at the working wavelength. A window sold on appearance alone carries no number to check.

Frame, interlock and viewing distance

polycarbonate laser safety window on a laser cutting cell

The window sits in a frame that keeps the filter flat, because a bowed filter changes the viewing angle and can leak at the edge. An interlock on the door is what stops an operator opening the cell mid cut.

Cleaning and inspection

Soot and spatter from the cut collect on the inner face. Cleaning has to follow the filter maker instructions, and any solvent that attacks the coating leaves a window that still looks correct while protecting nothing.

Cutting and edge finish for cell windows is covered in polycarbonate cut to size.

Send your laser type, wavelength and cell opening to oversales@rpplexiglass.com for a quotation.

Frequently Asked Questions

Which wavelength does the filter need to block?

Whatever the machine emits: 1064 nm for a fibre laser, 10.6 micron for CO2, 450 nm for blue diode. A window ordered by colour rather than by wavelength is not a safety device.

Is polycarbonate suitable near a laser?

For the window and the guard structure, yes. The absorbing filter is what does the protection work, and the substrate has to hold that coating without distorting the view.

How often should the window be checked?

At every filter change and at the annual machine inspection. A coated window that has been cleaned with solvent can lose protection without any visible change.