Polycarbonate paintball barrier panels take hundreds of hits in a weekend, and the specification that matters is not the first hit but the two hundredth.
A field near Manchester ran 4 mm acrylic screens for one winter. Cracks at the fixing holes ended the season early, and the replacement was 5 mm polycarbonate in rubber lined frames.
Span and thickness in a polycarbonate paintball barrier
- Panel: 5 mm standard, 8 mm wide span
- Support spacing: 1200 mm maximum
- Frame: rubber lined channel
- Panel size: 1200 x 2400 mm typical
A panel held in a rubber lined channel can deflect under a ball and return. A panel bolted through its face has a stress point at every hole, and that is where a crack starts.
Paint, visibility and cleaning
Fresh paint comes off with warm water and a plastic scraper. Paint left to cure becomes a shell that needs mechanical removal, and scraping a cured shell is how a surface picks up scratches over a season.
Replacing one panel instead of a wall
Modular panels sized to a standard frame mean a damaged unit is swapped in minutes. Fields that build a barrier as one continuous sheet lose a whole run when a single section cracks.
Guard panel design for impact service is covered in polycarbonate machine safety guards.
Send your field layout, ball velocity and panel count to oversales@rpplexiglass.com for a quotation.
Frequently Asked Questions
Which thickness for a paintball barrier?
5 mm stops a 300 fps ball at typical field temperature, 8 mm where a panel is unsupported over a wide span or is hit repeatedly at close range.
Can paint be cleaned off?
Yes, if it is removed before it cures hard. Warm water and a plastic scraper take fresh paint off a smooth surface, and a cured shell needs a scraper plus care.
Why not use acrylic for paintball?
Acrylic cracks under repeated ball impact at cold temperatures. Polycarbonate bends and returns, which matters on an outdoor field in winter.
