Paint shops rarely call because a polycarbonate spray booth window broke. They call because they cannot see the panel they are spraying, and the window has become a translucent yellow sheet that hides defects rather than revealing them.
That changes how a polycarbonate spray booth window should be specified. Clarity after cleaning, solvent resistance and the ease of replacement matter more than impact strength, which is already far beyond what a booth needs.
Cleaning chemistry and the polycarbonate spray booth window
The pane fails from the cleaning side, not the paint side. Overspray comes off with a solvent wipe, and ketone based cleaners craze polycarbonate within a few passes. Once crazed, the surface scatters light and no amount of polishing brings it back.
- Light booth, up to 600 mm: 6 mm polycarbonate
- Large booth, up to 1200 mm: 10 mm
- Frame: aluminium, dry glazed, no silicone at the pane face
- Cleaner: alcohol or mild detergent, never acetone or lacquer thinner
Cleaning should be a two step process: wipe with a solvent free detergent and a soft pad, then dry. Paint that has cured needs a plastic scraper at a shallow angle, never a razor blade.
Frame detail and reversing the pane
The frame is aluminium with a dry EPDM gasket. Silicone sealant at the pane face traps solvent against the sheet and produces a craze line along the edge that spreads inward.
The reversing trick
Windows are usually mounted so the pane can be flipped at the halfway point of its life. Flipping exposes the clean inner face to the paint side, and shops get roughly double the service before replacement. A symmetric window opening makes that possible.
River People cuts booth windows to your opening with gasket and frame kits, leaving the protective film on the clean face until commissioning. Send the booth model and solvent to oversales@rpplexiglass.com.
Send the booth model, window size and solvent type to oversales@rpplexiglass.com for a quotation on cut booth windows with frame kits.
Booth windows are replaced one at a time, and the polycarbonate cut to size service page explains how to order a matched pane against an existing opening.
Frequently Asked Questions
Why polycarbonate instead of glass in a spray booth?
Booth operators clean windows with scrapers and solvent. Polycarbonate takes a knock without shattering into the work area and can be cut on site to size.
Which solvents attack polycarbonate?
Ketones, esters and chlorinated solvents craze it. Most paint shop cleaners are ketone based, which is why cleaning method matters more than the sheet grade.
How long does a booth window last?
Six to eighteen months depending on paint volume and whether the pane is reversed at the halfway point. Reversing uses the clean side of the sheet.
