Polycarbonate Tram Window: Rail Glazing

A polycarbonate tram window is approved or rejected on a fire certificate long before anyone discusses optics. EN 45545-2 sets hazard levels for rail materials, and a glazing panel that misses its level cannot be fitted however well it performs in service.

That is the first filter. Everything after it, thickness, coating, frame allowance, is detail that follows from the vehicle specification.

Hazard level and the polycarbonate tram window

  • Fire: EN 45545-2, R22 / R23, HL1 to HL3
  • Panel: 8 mm clear PC, 10 mm for large single panes
  • Hard coat: 3 to 5 microns, both faces on exterior panes
  • Light transmission: about 88 percent at 8 mm
polycarbonate tram window fitted in a light rail vehicle side panel

HL2 is the level most European tram operators write into their specifications for side windows, and FR grades of polycarbonate are available at that level without a laminated glass build. Where the operator requires HL3, the panel usually moves to a laminated construction and the weight penalty has to be absorbed by the frame.

Coating, cleaning and the polycarbonate tram window

Polycarbonate scratches at a pencil hardness level that platform brushes reach easily. A 3 to 5 micron hard coat lifts surface hardness enough to keep haze under 2 percent after the 500 wipe cycles most operators test to. Uncoated panels in a depot wash show a visible dull band along the lower third within a year.

Frame allowance and thermal movement

Polycarbonate expands about 1.8 mm per metre over a 50 K swing, roughly twice glass. A window pocket sized for glass will pinch a PC pane in summer and bow it in winter. A 2 mm clearance per side, with a gasket that allows movement, is the detail that stops cracking at the corner radius.

River People supplies tram glazing cut to the vehicle drawing with hard coat and fire documentation, packed per car set. Drawings go to oversales@rpplexiglass.com.

Send the vehicle type, window drawing and hazard level to oversales@rpplexiglass.com for a quotation with material and fire data sheets.

Rail operators weighing security glazing alongside fire performance should read our train station security glazing guide.

Frequently Asked Questions

Which hazard level applies to a tram window?

Typically R22 or R23 at HL2 for exterior side windows, set by the operator. The level is stated in the vehicle specification, not chosen by the glazing supplier.

Why hard coat on a tram window?

Platform cleaning brushes and daily wipe down abrade uncoated polycarbonate within months. A hard coat of 3 to 5 microns keeps haze below 2 percent.

Does polycarbonate meet the same impact class as glass?

It exceeds it. Uncoated PC at 8 mm resists impact levels that break toughened glass of the same thickness, which is why it is used on routes with vandalism history.