Polycarbonate Truck Bed Cover: Pickup

Pickup owners ask for a polycarbonate truck bed cover for one reason: they want to see what is back there without opening it. Polycarbonate delivers that, but only if the panel is ribbed and UV stabilised, and most failures come from skipping one of the two.

A fleet in Alberta fitted flat 5 mm covers to twelve trucks and lost four of them in the first winter. Snow load bowed the panels until the hinges pulled through, so the replacement went to 8 mm with ribs at 450 mm.

Snow load and rib spacing on a polycarbonate truck bed cover

  • Panel: 8 mm UV grade polycarbonate
  • Ribs: 40 mm deep, 450 mm centres for snow regions
  • Hinge: continuous aluminium extrusion, not point hinges
  • Latch: two point, keyed, with a rubber bumper
polycarbonate truck bed cover fitted on a pickup truck

Fresh snow at 100 kg per cubic metre over a 1.7 x 1.5 m bed is 150 kg at 100 mm depth. A flat panel at 8 mm carries that at 450 mm rib spacing with about 4 mm deflection, which is the practical limit before water pools.

Ribs are bonded and also bolted at the ends. Bond only ribs peel under repeated thermal cycling, because polycarbonate moves about 3 mm per metre over a 60 C swing and the adhesive takes that strain at the ends.

Hinges, seals and the polycarbonate truck bed cover in rain

A continuous hinge spreads load along the panel edge and keeps water out of the bed at the front. Point hinges concentrate stress at two bolt holes, and those holes are where cracks begin.

Tailgate seals should sit on the cover rather than the bed rail, so the cover can move with thermal expansion without dragging the seal out of place.

River People cuts and ribs bed covers to your bed dimensions, with UV grade sheet and edge trim matched to the truck colour. Send the bed size and annual snow depth to oversales@rpplexiglass.com for a quotation.

Send your bed length, width and expected snow load to oversales@rpplexiglass.com for a quotation on cut and formed bed covers.

Bed covers are cut to a truck outline, and the polycarbonate sheet cut to size note explains how oversize panels and edge trim are handled on cut parts.

Frequently Asked Questions

Will polycarbonate yellow in sunlight on a truck bed?

UV co extruded grades hold clarity for 10 years or more outdoors. Unprotected polycarbonate yellows and chalks within two summers.

What thickness for a 1.7 m bed cover?

8 mm with ribs at 500 mm centres, or 6 mm with ribs at 350 mm. A flat 6 mm panel over 1.7 m sags visibly under snow.

Can the cover be drilled for hinges?

Yes, but holes need 3 mm clearance and should sit outside the load path. Tight holes crack the panel at the first hot day.