A polycarbonate vending machine front is the only glazing in retail that a customer inspects from 400 mm away, in the dark, through their own reflection. Every defect on that panel is a defect on the product behind it, and every defect behind it looks like a defect in the machine.
That is why front specification is stricter than the rest of the cabinet.
Thickness and the polycarbonate vending machine front
- Small front under 600 mm: 4 mm polycarbonate, hard coated
- Large front over 900 mm: 5 mm polycarbonate, hard coated
- Transmission: 88 to 90 percent, anti glare where lamps sit above
- Cut outs: 1 mm clearance around a delivery port, sealed with EPDM
A 4 mm panel on a 900 mm front bows about 3 mm toward the spirals once the machine warms, and that bow distorts a crisp packet into a curved shape. The customer reads it as a stale product rather than a bent panel.
Security and the polycarbonate vending machine front
Coins, keys and the occasional deliberate strike are the daily load. Polycarbonate absorbs them; acrylic at the same thickness crazes and then splits along the craze. Where a bank sits outdoors and unattended, a laminated 3 plus 3 mm front holds the fragments after a strike and keeps the cabinet sealed until the operator arrives.
Cleaning and the polycarbonate vending machine front surface
Machine fronts get wiped with whatever the route driver carries. A hard coat survives alcohol wipes and mild detergent; uncoated polycarbonate hazes within months of the same routine. Where the front is printed with a brand band, the print should sit on the inner face so the outer surface stays a plain coated sheet.
River People cuts fronts to your machine drawing with hard coat, cut outs and port seals. Send the front dimensions and siting to oversales@rpplexiglass.com.
Send the machine model, front dimensions and indoor or outdoor siting to oversales@rpplexiglass.com for a quotation on trial panels.
Machines that show product through a formed tray rather than a flat front are covered in PETG vending machine display panels.
Frequently Asked Questions
4 mm or 5 mm for a snack machine front?
5 mm for a large front above 900 mm height. A 4 mm panel bows toward the product spiral and reads as a distorted image at arm length.
Does a coated front reduce clarity?
By about 1 percent light transmission, which is invisible in a lit machine. The gain is a surface that survives cleaning chemicals and coins.
Why laminate for outdoor banks?
A laminated 3 plus 3 mm front holds fragments if the outer layer is damaged, which matters where the public stands against the machine.
