A polycarbonate squash court wall is usually glazed so the gallery can follow the ball, and it is judged the first time a player drives into it. The answer depends less on the pane than on what sits behind the pane and how the pane is fixed.
Court glazing is a lighting problem with a structural constraint attached.
Thickness and the polycarbonate squash court wall
- Club court: 10 mm polycarbonate, hard coated, clear
- Championship court: 12 mm, laminated 6 plus 6 where a backing wall is omitted
- Fixings: continuous channel, 3 mm clearance per metre
- Joint: 4 mm silicone, no rigid filler between panes
A 10 mm pane 1,200 mm high spanning 3,000 mm deflects about 6 mm under a hard drive. That deflection is elastic and the ball rebounds normally; the problem appears only when the pane is bolted at the edge, because the bolt then carries the deflection as a point load.
Light and the polycarbonate squash court wall shadow
A single clear pane behind a plaster wall produces a shadow line where the plaster meets the acrylic or polycarbonate. Where the pane replaces part of the wall, the joint needs a 4 mm silicone bead and a matte painted reveal, otherwise the court reads as having a dark stripe at the height a player tracks the ball through.
Cleaning and the polycarbonate squash court wall surface
Court glass collects hand marks at the gallery and ball dust at the base. A hard coat takes a damp microfibre and a neutral detergent. Ammonia and abrasive pads haze the surface, and a hazed court pane is the one defect players report to the club committee.
River People supplies court panes to your wall build up with edge polishing and channel details. Send court dimensions and court count to oversales@rpplexiglass.com.
Send the court dimensions, wall build up and number of courts to oversales@rpplexiglass.com for a quotation with fixing details.
Court panes with a protection requirement share their fixing logic with security glazing for courthouse interiors.
Frequently Asked Questions
10 mm or 12 mm behind a play wall?
12 mm for a championship court where ball speeds are highest, 10 mm for club courts. Both are used as a backing pane behind a plaster play surface.
Will polycarbonate mark from ball impact?
A hard coated surface resists ball marks. Uncoated sheet takes a visible scuff from a hard hit and the scuff collects dust.
How is the pane fixed?
Through a continuous aluminium channel with 3 mm clearance per metre, never bolted edge to edge.
