The complaint arrives with a photograph every time: a cloudy white patch under an acrylic countertop protector, exactly where a kettle sits. It is not staining and it is not a material defect. It is condensation that cannot escape.
Protectors are a simple product with three failure modes, and all three are decided at the drawing stage.
Heat: where the acrylic countertop protector gives up
Cast PMMA holds its shape to about 80 C in continuous service and deflects near 95 C. A pan lifted off an induction hob is at 180 C or more on the base. Nothing about a protector can change that, and a supplier who promises otherwise is selling a replacement cycle.
- Continuous service: 70 C to 80 C
- Short exposure: 90 C, minutes only
- Hob clearance: 150 mm from any gas burner
- Dishwasher: never, on any thickness
Cut marks and the acrylic countertop protector surface
A knife drawn across 3 mm sheet leaves a groove that fills with food soil. 4 mm to 6 mm takes the same groove shallower, and a flame polished edge stops the blade from catching when it slides off the board. Buyers who specify 3 mm to save cost usually replace the sheet within 18 months.
Moisture, feet and staining
Four silicone feet at 12 mm height turn a sealed pocket into a ventilated gap. On dark stone the difference shows within a week: the ventilated sheet stays clear, the flat sheet grows a haze that no cleaner removes.
River People cuts protectors to your worktop outline with polished edges and feet fitted, packed flat for shipping. Drawings go to oversales@rpplexiglass.com.
Send your worktop dimensions, corner radius and edge finish to oversales@rpplexiglass.com for a quotation on cut to size protectors with silicone feet.
Sheet sizes, tolerances and edge options for protectors are set out in our cut to size service guide.
Frequently Asked Questions
Can a hot pan go straight on the protector?
No. Cast acrylic softens near 95 C and a pan off the hob is far above that. Use a mat, or accept the mark.
Why does moisture appear under the sheet?
Condensation trapped between flat acrylic and stone. Four silicone feet at 12 mm height let the surface breathe and stop the cloudy patch.
Which thickness for a rental kitchen?
4 mm. It resists knife scuffs better than 3 mm and still cuts cleanly to a worktop edge.
