A lab in the north of England replaced 1,400 acrylic dental model boxes in one order after an audit found plaster dust inside a third of the old stock. The boxes were not worn out. They had been bought on price with a lid cut to fit exactly, and every lid had bound shut within a year.
Storage boxes fail on clearance and on labelling, rarely on wall thickness.
Internal height and the acrylic dental model box stack
- Internal: 130 x 130 x 90 mm for a single trimmed model
- Wall: 3 mm cast, base 5 mm cast
- Lid: 3 mm cast, 1 mm clearance per side, 8 mm overlap skirt
- Stack: 4 high with 95 mm pitch, no nesting
A 90 mm internal height is the number labs converge on. Below 85 mm a mounted model touches the lid and the plaster crumbles into the box in transit; above 100 mm the box stops fitting the standard shelving and the drawer count drops.
Lid fit and the acrylic dental model box in a humid room
A plaster model releases moisture for days after setting, and that moisture finds the lid. A lid with 1 mm clearance per side and a skirt that overlaps the box by 8 mm stays free, while an exact fit binds as the acrylic and the plaster both move. Where boxes are stacked, the base needs to be 5 mm rather than 3 mm so the weight of four boxes does not bow the bottom one.
Labels, plaster dust and the acrylic dental model box finish
Paper labels are the weak point in a plaster room. Laser engraving on the front face at 6 mm cap height survives wiping, and the patient reference stays legible after years of handling. Engraving depth of 0.3 mm does not collect dust the way a printed label edge does.
River People builds boxes to your model footprint with engraved labels and optional colour coding by clinician. Send the mount type and annual quantity to oversales@rpplexiglass.com.
Send the model footprint, mount type and annual quantity to oversales@rpplexiglass.com for a quotation on boxes with engraved patient labels.
Where a box has to sit on a clinical bench rather than a lab shelf, the tolerance approach in acrylic medical device enclosures.
Frequently Asked Questions
What internal height clears a mounted model?
90 mm. A plaster base on an articulator mount sits at 75 to 85 mm once trimmed, and a 90 mm box leaves room for a foam pad underneath.
Why do lids stick in a dental lab?
Humidity and plaster dust. A lid with 1 mm clearance per side and a rounded lip opens cleanly; a lid cut to fit exactly will bind within a month.
Can labels be etched into the box?
Yes, laser engraved on the front face at 6 mm cap height. Paper labels lift under plaster dust and cleaning wipes.
