Acrylic Donut Display: Bakery Case

A bakery chain audited 40 stores and found 210 cracked acrylic donut display trays in a single year, all failing at the same place: the front left corner, where staff lift a loaded tray with one hand.

That number points at the design, not the material. A tray that is lifted 30 times a day needs a corner radius and a base thickness that most catalogues skip.

Corner radius, depth and the acrylic donut display tray

  • Footprint: 400 x 300 mm and 400 x 400 mm, 4 mm walls
  • Base: 5 mm, 6 mm corner radius
  • Depth: 35 mm small rings, 45 mm filled doughnuts
  • Crumb pan: 1 mm clearance under the tray
acrylic donut display trays inside a bakery glass case

A 90 degree square corner concentrates the lift load on roughly 12 mm of joint. Rounding to 6 mm spreads it across the curve, and the same tray at 5 mm base survives the audit year that the 4 mm version failed.

Washing, stacking and the acrylic donut display pitch

Trays are washed by hand at the end of shift in water that runs hot at the tap. Cast acrylic deflects near 95 C, so a tray rinsed at 70 C and stacked wet bows overnight and never sits flat again. A 60 C wash and air drying on edge keeps geometry for years.

Tier spacing that reads from the door

Three tiers at 200 mm vertical pitch show the top row to a customer at the counter but hide it from the door. Dropping the middle tier by 30 mm and angling the top tray 8 degrees makes all three readable from four metres, which is where the purchase decision is made.

River People supplies trays, crumb pans and tier frames cut to your case opening. Case drawings go to oversales@rpplexiglass.com.

Send your case opening, tier count and tray quantity to oversales@rpplexiglass.com for a quotation on trays with matching crumb pans.

Where a case also needs a sneeze guard, the detail sits in our food display guard guide.

Frequently Asked Questions

Why do bakery trays crack at the corners?

Corner stress from lifting a loaded tray with one hand. A 6 mm corner radius and a 5 mm base spread the load, and handling guidelines stop the single hand lift.

Are trays dishwasher safe?

No. Cast acrylic distorts above 80 C. Hand wash at 60 C and air dry, or the tray will bow within a month.

What depth stops doughnuts rolling off?

35 mm for small rings, 45 mm for filled and oversized doughnuts.