Polycarbonate food display guard panels are bought by shops that want the barrier to disappear into the counter rather than dominate it, and the detail that decides that is the pass through gap.
A deli chain in Rotterdam fitted guards with a single 500 mm opening. Customers kept passing cash around the side of the panel, so the guards were recut with a 300 mm opening plus a small shelf for card readers.
Opening size in a polycarbonate food display guard
- Pass through: 300 mm wide, 150 mm tall
- Card reader shelf: 200 mm deep
- Panel: 4 mm straight run, 6 mm long run
- Base: 20 mm gap above the counter for wiping
The opening is a compromise between protection and habit. A shelf at the opening lets a card machine sit where a hand already goes, which removes the reason customers reach around the guard.
Frame, base gap and cleaning
A 20 mm gap at the base lets a cloth pass under the panel, so crumbs and spills are wiped rather than trapped. Guards that sit directly on the counter look neater and collect debris along the line.
Cleaning chemicals and clarity
Food areas are cleaned with sanitisers that craze a standard sheet over months. A chemical resistant grade, or a hard coated face, is what keeps a guard readable after a year of daily wiping.
Guard enclosure design for retail counters is covered in polycarbonate enclosure builds.
Send your counter length, serving layout and quantity to oversales@rpplexiglass.com for a quotation.
Frequently Asked Questions
Which thickness for a counter guard?
4 mm for a straight guard under 1200 mm and 6 mm for a long run or a guard that is handled every day.
Is polycarbonate food safe?
The sheet is suitable for food display use, and the frame and fixings have to be specified the same way. Cleaning chemicals matter as much as the material for a long lived guard.
How big should the pass through gap be?
300 mm wide and 150 mm tall for payment and bag handling. A larger opening defeats the purpose, a smaller one has customers handing money around the edge.
