Polycarbonate ATM Surround: Vandal Glazing

A polycarbonate ATM surround is designed against a fifteen second attack, not a thirty minute one. That is the number bank security teams work to: how long a hammer and a crowbar need to reach the cash cassette through the fascia.

Glazing that survives the first strike and stays in the frame is the difference between a damaged machine and a loss.

Build and the polycarbonate ATM surround

  • Panel: 8 mm laminated PC, 10 mm for exposed lobbies
  • Construction: 5 plus 5 mm with PVB interlayer
  • Frame: keyed aluminium, panel clamped on 8 mm land
  • Aperture lip: 4 mm, card slot and receipt slot
polycarbonate ATM surround around a cash machine in a bank lobby

A single 10 mm sheet resists the blow but transfers the load straight to the fixings, and the pane comes out of the frame as a unit. Laminating two plies changes that: the interlayer absorbs the strike and the panel stays clamped, so the attack has to start again.

Skimmers, cameras and the polycarbonate ATM surround

Most card skimming relies on a few millimetres of gap around the slot. A surround that sits 6 mm proud with a 4 mm lip closes that gap, and the skimmer device cannot be seated. Camera and lamp apertures are the other cut outs that must be in the drawing before cutting, because a hole added after lamination exposes the interlayer edge.

Replacement logistics

Surrounds get replaced after storms, ram raids and accidents, always in a hurry. A standardised frame with pre drilled panels and a published torque spec turns a two hour job into twenty minutes, and it keeps the branch open.

River People supplies laminated ATM surrounds cut and drilled to the machine drawing, with interlayer documentation. Drawings go to oversales@rpplexiglass.com.

Send the machine model, surround drawing and site risk level to oversales@rpplexiglass.com for a quotation with a laminated sample.

Broader forced entry work is covered in our polycarbonate security glazing guide.

Frequently Asked Questions

Single sheet or laminated for an ATM surround?

Laminated. Two 5 mm plies with a PVB interlayer stay in the frame after a strike that would pull a single 10 mm pane out.

How is a skimmer blocked?

A 4 mm lip on the card slot aperture, with the surround sitting 6 mm proud of the fascia. The gap that skimmers need is removed.

Can a damaged panel be swapped on site?

Yes, with a pre drilled replacement and a keyed frame. Most banks carry one spare surround per region.