A polycarbonate forklift window is a consumable in a busy warehouse, replaced when a mast or a load finds the cab, and the specification that matters is impact direction plus a gasket that does not let the pane walk out of the frame.
A logistics operator in Rotterdam ran 60 trucks and replaced 14 side panes in one year. Every failure was on the mast side, all at the lower quarter of the pane, and all after a load shifted during a turn.
Impact direction and thickness on a polycarbonate forklift window
- Front screen: 6 mm, impact spread over a wide area
- Mast side pane: 8 mm at the lower quarter
- Top pane: 5 mm, mostly weather and debris
- Edge distance: 25 mm from bolt to pane edge
Strike location, not pane size, sets the thickness. A load that hits low on the mast side concentrates force in a small area, and a 6 mm pane in a cold warehouse is less forgiving than the same pane at 20 C.
Gasket, bolt and mast clearance
A pane that is bolted directly to a steel frame without a gasket chips at the bolt holes. A 3 mm EPDM gasket spreads the load, absorbs the flex and keeps the pane from fretting against the frame as the truck works.
Clearance to the mast
The mast deflects under load. A pane fitted with 10 mm clearance will be struck by the mast on a rough yard, and the mark it leaves becomes a crack start. Checking the deflection on a loaded truck before ordering fixes the tolerance.
Replacement practice
Panels are cut from a template taken off the frame with the old pane in place, so the gasket land and bolt pattern come from the truck rather than a drawing. A stock of two panes per model keeps a truck working while a batch is ordered.
Guard panels on fixed plant use the same impact logic and are covered in polycarbonate machine safety guards.
Send your truck model, window drawing and fleet size to oversales@rpplexiglass.com for a replacement panel quote.
Frequently Asked Questions
Which thickness for a forklift side window?
6 mm for a standard counterbalance truck, 8 mm where loads are handled above 4 m or in a foundry. The impact comes from the load and the mast, not from the driver.
Why does the original glass fail?
Glass takes the first strike and shatters into the cab. Polycarbonate bends and returns, so the same strike leaves the pane in place with a mark rather than a hole.
