Polycarbonate Welding Curtain: Arc Screening

A polycarbonate welding curtain is a piece of personal protective equipment for people who are not wearing a helmet. That framing decides the grade, the shade and where the screen stands.

Most bays buy clear sheet because it is cheaper, which protects nobody from the arc flash that causes the eye complaints two days later.

Grade and the polycarbonate welding curtain

  • Panel: 3 mm amber or green, EN 1598 filtering
  • Shade: 2 to 3 for MIG screening, 3 for heavy TIG
  • Frame: 20 x 20 mm aluminium, panel clipped not bolted
  • Rail: floor rail with castors, 1.8 m height standard
polycarbonate welding curtain screening an arc welding bay

Amber grade absorbs the ultraviolet band and the blue end of the visible spectrum, which is where arc flash damage sits. Green grade suits plasma and heavy TIG where the arc is brighter. Clear polycarbonate at any thickness passes the same UV as window glass, so it is a barrier against spatter only.

Spatter, cleaning and the polycarbonate welding curtain

Spatter sticks to uncoated sheet and cannot be removed without scratching, so the panel hazes in the line of the arc within weeks. A hard coated face releases most droplets cold, and the rest come off with a plastic scraper. Solvent wiping is a mistake: it crazes the face and destroys the optical grade the screen was bought for.

Layout that protects the bay

The screen should stand between the arc and the nearest walkway, not between the arc and the welder. A 1.8 m panel at 900 mm from the arc blocks the flash path for anyone passing behind, while leaving the welder an unobstructed view of the pool.

River People supplies welding panels in filtering grades with frames and rails, cut to bay height. Layouts go to oversales@rpplexiglass.com.

Send your bay layout, process and screen quantity to oversales@rpplexiglass.com for a quotation on panels with frames, rails and castors.

Filtering grades for other high energy processes are listed in our laser safety window guide.

Frequently Asked Questions

Which shade for MIG and TIG?

Shade 2 to 3 for transparent screening around MIG, shade 3 for TIG at higher amperage. The welder still wears a helmet; the curtain protects everyone else in the bay.

Does the screen block the view of the work?

Amber grade keeps the arc visible while filtering UV to the EN 1598 level. Clear polycarbonate blocks nothing and is not a welding screen.

Will spatter pit the surface?

Yes, and it is normal. Spatter releases from a hard coated face; uncoated sheet holds the droplets and hazes within weeks.